JNBS Mini Sterilizer S2

1. Power On: Flip the battery switch to turn on the sterilizer. The four working indicators will light up by default.
2. Select Sterilization Time: Press the touch switch to choose the sterilization time:
3. 1-minute button for quick disinfection
4. 3-minute button for deeper cleaning
   The device will beep to signal the start of the disinfection process. As the sterilization progresses, the four working lights will flicker off in turn. Once the lights are all turned off, a short drip sound will signal that the disinfection process is complete.
5. Safety Features:
6. Auto Shut-off Protection: If the top cover is opened or if the sterilizer is tilted during the disinfection process, the UVC light will automatically turn off to prevent exposure to UV rays.
7. Battery Indicator:
8. If the battery is below 20%, the low battery indicator will turn red. This means the device needs to be charged.
9. Charging: Connect the device to a regular 5V 2.0A charger. The charging indicator will light up with a breathing effect (gradually brightens and darkens). Once fully charged, the light will become a steady bright blue, typically after 3 hours.
10. Power Off: Once sterilization is complete, press the button to turn off the device and conserve battery life.

*Keep out of reach of children

1. 10pcs UVC Bulbs

2. Rated powder: max 10W

3. DC input: 5V 2.0A

4. Size: 246x126x53mm

5. Wave length: 275nm

6. Battery: 3.7V 1800mAh 6.66Wh